Lg washing machine repair code#
Lg washing machine repair professional#

Wash the drain hose out with hot water and detergent then rinse it out with clean water.

Remove these with a long, thin object or by squeezing them along the length of the tube to the end.

Feel along the length of the drain hose for foreign objects that may have become stuck inside.

Check for kinks along the length of the hose, and remove them by untwisting.

Remove the drainage hose, being careful to drain any remaining wash water into a bucket.

Pull the washer out of its place so you can access the back.

Turn off the water supply to the washer, and unplug the power at the wall.

In either case, the washer will not drain.įollow these steps to check the drain hose and remove any blockages: The drainage hose itself can become blocked by foreign objects or lint that make it past the drain filter. Replace the filter by screwing it in clockwise until it is secure. Clear any small objects from inside the filter and the filter casing before cleaning the filter thoroughly with hot water and a soft brush. Remove the filter by firmly twisting it counterclockwise and unscrewing it.

For front-loaders, open the access panel on the front of the washer in the lower left corner.

For top-loaders, pull the washer out from the wall, and locate the filter at the bottom of the rear panel just right of center.

Before cleaning the filter, turn off the power and water to the washer.

The filter is located in a different place on front- and top-loaders. If you haven’t cleaned the drain filter for a few months or longer, it is likely to be the problem. When this happens, the washer may not be able to drain. It needs to be cleaned out regularly, or it can become blocked. The drain filter collects threads, lint, and small objects from the wash water as it drains out of the tub after a wash.

Reconnect the drain hose, put your washer back in its place, and turn the water and power back on.

Let the water flow into the bucket until all the water has drained.

If there is a clamp holding it in place, you may need to use pliers or a Phillips-head screwdriver to loosen this first.

Disconnect the drain hose from the drain pipe.

Place towels and a bucket underneath the point where the drain hose connects to the drain pipe.

Locate the gray drain hose connecting the washer to the drain pipe in the wall.

Pull your washer out from the wall so you can access the back.

To manually drain a top-loader, you will need to use the washer’s main drain hose.

Take the plug out of the drain hose, and let it drain completely into the pan.

Place a shallow pan next to the access panel, and pull the drain hose out from its clip so that it will drain into the pan.

This is located on the front of your washer at the bottom left corner.

Switch off the power at the wall, or unplug the washer.

Turn off the faucet supplying your washer.The process is different for top-loading and front-loading models. If you can’t get the washer to drain using the steps above, you will have to manually drain the remaining wash water to complete the rest of the methods. Try rebalancing the load by shifting items around and adding a few extra items to see if this fixes the problem.

Lg washing machine repair code#

Your digital display should show the error code “UE.” Rebalance the LoadĪnother simple problem that can stop the washer from draining is an unbalanced load.

Lg washing machine repair professional#

If this is your problem, you should call a professional appliance repair technician to conduct the repair. Press the door or lid firmly shut to see if this kickstarts the draining process. If this is the problem, you will most likely see the error code “OE” on your digital display. This causes the draining function to stop. If the door lock assembly has become loose, it can fail to sense when the door or lid is closed. This is achieved by a failsafe switch that will not let the cycle run until the door locks and it is engaged. Washers will not run if the door or lid is not closed. The following models of LG washer are covered by this guide: Read on to find out what usually causes a washer to stop draining and find out what you can do to fix the problem. While this is a frustrating problem, it can often be very simple to fix. If your LG washer isn’t draining after you run a wash cycle, do not panic.